Personal tools
You are here: Home Distribution SLF 5 Release Notes Fermi.releasenote.53.i386.txt
Views
Document Actions

Fermi.releasenote.53.i386.txt

by Troy Dawson last modified 2010-02-08 16:02
History
Action Performed by Date and Time Comment
Publish Troy Dawson 2010-02-08 17:02 No comments.

Scientific Linux Fermi 5.3 i386 April 1, 2009

Please send bug reports to dawson@fnal.gov,csieh@fnal.gov

Items marked with a "*" have changed since SLF 5.2 .

Please read the Release Notes for Scientific Linux. It is located at
SL.releasenote

Also read the Upstream Vendor release notes . They are located in
Upstream.vendor.releasenote

All of the info in the SL.releasenote is valid unless this document
states otherwise. This document only contains info that is specific
to the Fermi site. Any reference to SL.releasenote is done to emphasis
that it contains important information.


----------------------------------------------------------------------------

This is based on the rebuilding of RPMS out of SRPMS's that form Scientific
Linux. Please read this entire document before installing.

Table of contents

INSTALLATION INFO
ADDED compared to Scientific Linux 5.3
UPDATED compared to Scientific Linux 5.3
Installer modifications
/contrib
/docs
/notsupported
MISC Notes
HARDWARE SPECIFIC ISSUES
SOFTWARE ISSUES/BUGS
SUPPORT INFO
vendor ERRATA

Each has a "---" line above and below it.
_____________________________________________________________________________
INSTALLATION INFO
_____________________________________________________________________________
Installation Locations

Via NETWORK:

nfs:
linux.fnal.gov:/export/linux/slf53/i386/
ftp:
linux.fnal.gov /linux/slf53/i386
http:
linux1.fnal.gov /linux/slf53/i386

And our easy to remember location

ftp://linux.fnal.gov/downloads/slf53/

Default is http, ftp is very very slow.

network install with floppy

There is no floppy install as the kernel is too big to fit on a floppy.

network install with cdrom

There is a boot.iso which is small iso image which includes all the
drivers. After download you can use cdrecord to create a cdr with this
image on it.

ftp://linux.fnal.gov/download/slf53/network.install.i386/boot.iso

There is a DVD image

Download and then burn the dvd iso image from

ftp://linux.fnal.gov/download/slf53/dvd.install.i386/

There cd images

Download and then burn the cd iso image from

ftp://linux.fnal.gov/download/slf53/cd.install.i386/

Installing a Xen Paravirtualized Guest

When installing a Xen Paravirtualized Guest, the location is

http://linux1.fnal.gov/linux/slf53/i386/sites/Fermi


-----------------------------------------------------------------------------
ADDED compared to Scientific Linux 53 i386
-----------------------------------------------------------------------------
Fermi-release
Fermi-release-notes

* Fermi-release-5.3-1.i386.rpm
* Fermi-release-notes-5.3-1.noarch.rpm

Made change so that /etc/redhat-release, /etc/issue and /etc/issue.net
show Scientific Linux Fermi instead of just Scientific Linux.

Clam Anti Virus

Clam Anti-Virus. Obtained from the DAG repository and rebuilt from
src.rpm. http://www.clamav.net
* perl packages were added so that clamtk would work

* clamav-0.94.2-1.rf.i386.rpm
* clamav-db-0.94.2-1.rf.i386.rpm
* clamav-devel-0.94.2-1.rf.i386.rpm
* clamav-milter-0.94.2-1.rf.i386.rpm
* clamd-0.94.2-1.rf.i386.rpm
* clamtk-3.09-1.rf.i386.rpm
* perl-Config-Tiny-2.12-1.rf.noarch.rpm
* perl-ExtUtils-Depends-0.301-1.rf.noarch.rpm
* perl-ExtUtils-PkgConfig-1.11-1.rf.noarch.rpm
* perl-File-Find-Rule-0.30-1.rf.noarch.rpm
* perl-gettext-1.05-1.rf.i386.rpm
* perl-Glib-1.200-1.rf.i386.rpm
* perl-Gtk2-1.183-1.rf.i386.rpm
* perl-Number-Compare-0.01-1.2.rf.noarch.rpm
* perl-Text-Glob-0.08-1.rf.noarch.rpm


flpr

Installed by default. This does NOT require ups/upd.
The flpr binary will reside in /usr/local/bin/

flpr-2.4-4f.9x.i386.rpm

Kerberos

For SLF 5, we no longer need Fermi's kerberos. We are only including
packages for configuring krb5.conf, as well as some utilities.

krb5-fermi-config-2.8-1.noarch.rpm
krb5-getcert-1.9-5.slf5.noarch.rpm

OpenAFS

See SL.releasenote

* Here is the procedure for installing openafs, using yum
* yum install openafs-client kernel-module-openafs-`uname -r`
* yum install openafs-krb5 openafs-thiscell
*
* openafs-thiscell-FNAL now changes CellAlias so that
* /afs/fnal is really /afs/fnal.gov
*
* openafs-thiscell-FNAL-6.noarch.rpm

redhat-logos-1.1.25-1.LTS.6.noarch.rpm

This version of redhat-logo's has all of the generic changes
that were made with Scientific Linux as well as changes to make
it look like SLF.

redhat-logos-4.9.16-1.SLF.4.noarch.rpm

SLIP
Scientific Linux Inventory Project client

ocsinventory-client-0.9.9-9.noarch.rpm

upsupdbootstrap

Not installed by default.
Links from /usr/local/bin are NOT made anymore.
A error in the install script was fixed

upsupdbootstrap-5.0-0.i386.rpm
upsupdbootstrap-fnal-5.0-0.i386.rpm
conflicts with upsupdbootstrap-local
Installs ups/upd to /fnal/ups
upsupdbootstrap-local-5.0-0.i386.rpm
conflicts with upsupdbootstrap-fnal
Installs ups/upd to /local/ups

yum-conf

Modified to give Fermi's rpm's a priority, as well as point to
Fermi's linux distribution servers instead of scientific linux's.

* yum-conf-53-1.SLF.noarch.rpm

yum-conf-5x

Will keep you at 5x which is the current stable 5x release. So when
we release the next 5 release yum will automatically yum install it
except for the kernel.

yum-conf-5x-2-4.SLF.noarch.rpm

yum install yum-conf-5x

yum-autoupdate-1-1.SLF.noarch.rpm

yum-autoupdate has the nightly yum cron job in it.
The nightly cron job has been modified to check the add-ons directory.

zz_dhcp_resolv-3.0.5-1.noarch.rpm

This rpm fixes that so that when your network starts, as it checks
your resolv.conf, if you have dhcp.fnal.gov, but not fnal.gov it will
put it in, so that you will have "search fnal.gov dhcp.fnal.gov" in
your /etc/resolv.conf file.

zz_lang_collate-1.0-4.noarch.rpm

Changes LANG so that sorting is done the same as 6.1 and
earlier. (ABCabc instead of AaBbCc).
Can speed up programs that sort.

zz_local_dns_cache-1.0-3.noarch.rpm

This rpm will change your machine to use a local dns cache before
looking for the standard dns servers

zz_logwatch_df-1.1-2.noarch.rpm

By default logwatch does a df -h when looking at disk usage.
This can be unwanted if you have alot of NFS mounted disks.
This rpm changes that command to be df -lP -h, which looks at
local disks only, and the output is in the POSIX output format.

zz_ntp_configure-4.2.0-8.noarch.rpm

Configure ntp for Fermi site network.
Startup script now pokes hole in the firewall for itself
One can manually change the script by editing the file
/etc/sysconfig/ntpd.fermi

zz_pine_user_domain-1.0-2.noarch.rpm

By default when a user sends mail from pine their email address
is myname@mycomputer.fnal.gov. This rpm changes it so that the
default is myname@fnal.gov by modifying the /etc/pine.conf config file.

zz_sendmail_fermi_gateway-2.0-1.noarch.rpm

This rpm is designed to send outbound sendmail e-mail through
the fermilab e-mail gateway(smtp.fnal.gov).

zz_tcp_wrappers_change-3.0-3.noarch.rpm

Disable all offsite access to common network services. Also
puts in the "DOE required login banners". If it determines that
you have already modified /etc/hosts.allow or host.deny it leaves
them alone.
Change to add perl to requires as %post uses perl

zz_tex_tweaks-1.0-1.noarch.rpm

Changes the default paper size to 8.5 x 11 vs A3


---------------------------------------------------------------------------
UPDATED compared to Scientific Linux 53 i386
----------------------------------------------------------------------------
OpenSSH

This is the openssh from S.L. 5.x with some patches and modifications.

The client does kerberos with both fermi's old openssh(old gssapi),
as well as generic new openssh's(new gssapi)

The server only does the kerberos with the newer versions of openssh

It does 'kerberos only' by default

openssh-server is NOT installed by default.

openssh-4.3p2-41.slf5.i386.rpm
openssh-askpass-4.3p2-41.slf5.i386.rpm
openssh-clients-4.3p2-41.slf5.i386.rpm
openssh-server-4.3p2-41.slf5.i386.rpm



pam_krb5

This is a modified version of the pam_krb5 that comes with SL5.
This pam module has the ability to do cryptocard authentication.

* pam_krb5-2.2.11-6.slf5.i386.rpm

----------------------------------------------------------------------------
Installer modifications
---------------------------------------------------------------------------
Anaconda (installer)


Changes to "defaults" from vendor installer.

Firewall is on by default.
The zz_ntp_configure-4.2.0-6 rpm pokes a hole for inbound ntp.

US/Central is default timezone. vendor default was New York.

Kerberos is on by default with a realm of FNAL.GOV . vendor default
was off.

Default install is via http. If one wishes to use nfs then type
nfs at the isolinux prompt. If one wishes to use ftp then type ftp
at the isolinux prompt.

Added support for "sites"

Added support for workgroups

Workgroup maintainers can now check their workgroups in an out of cvs

Fixed the kernel-module bug that was in SLF 5.0

---------------------------------------------------------------------------
/contrib/
---------------------------------------------------------------------------
The packages in this section have been contributed by various people. They
are presented AS IS and there is no guarantee of them working. These packages
are NOT supported by us. They will only get security updates if the
contributor provides them. If you have questions about them then ask the
contributor.

To use with yum:
For one time only (prefered method)
yum --enablerepo=Fermi-contrib install <package>

To enable for all yum updates/install (including autoyum)

edit the file /etc/yum.repos.d/fermi-contrib.repo
and change the line
enabled=0
to
enabled=1

See README's in the RPMS/ directorys for specific package info.

/sites/Fermi/contrib/RPMS/

---------------------------------------------------------------------------
KNOWN LIMITATIONS/BUGS
---------------------------------------------------------------------------
The estimated time to install is not even close.

After you have picked a workgroup on the workgroup selection page and moved
to the next back, you cannot go back to that page. The installer will die.

---------------------------------------------------------------------------
MISC NOTES
---------------------------------------------------------------------------
If you select "linux text" or you might want to type
"linux text noipv6"
because the install trys to do ipv6 and since there is no support
at FNAL for ipv6 it takes a long time to timeout

kickstart users might want to add the "noipv6" option to their ks.cfg file
---------------------------------------------------------------------------
SUPPORT INFO
---------------------------------------------------------------------------
Fermi site users should start with the "Fermi" specific support areas and
use the Scientific Linux next.

Scientific Linux Fermi web pages

https://fermilinux.fnal.gov/

Fermi Linux Community support mailing list

linux-users@fnal.gov

Which is archived at

http://listserv.fnal.gov/archives/linux-users.html

Scientific Linux web page

http://www.scientificlinux.org
------------------------------------------------------------------------------
SECURITY ERRATA RELEASED AFTER SL53 was released
------------------------------------------------------------------------------


Powered by Plone, the Open Source Content Management System

This site conforms to the following standards: